Pol-Ease 2300 Mold Release
A blend of silicone oils and resins in a 12 ounce aerosol can. 12
cans per case. |
|
| 12 oz Can |
$9.95 |
|
| Case (12 Cans) |
$99.50 |
|
Pol-Ease 2350 Mold Release
A mineral spirits solution designed for use with RTV silicone rubbers. Can be brushed
or sprayed. |
|
| Quart |
$10.50 |
|
| 5 Gallons |
$86.00 |
|
Pol-Ease 2450 Mold Release
A fast drying silicone release that can be brushed or sprayed. Flammable. |
|
| Quart |
$11.25 |
|
| 5 Gallons |
$189.00 |
|
Pol-Ease 2500 Release Agent
An aerosol spray release agent that can be easily washed off cast parts for easy finishing. Spray a thin mist over mold surface, then brush gently for a uniform coverage. |
|
| 13 oz Can |
$9.95 |
|
| Case (12 Cans) |
$99.50 |
|
Pol-Ease 2601 Mold Release
Water-base emulsion of silicone oils and resins. This is an economical alternative to
aerosol release. |
|
| Quart |
$9.75 |
|
| 5 Gallons |
$105.00 |
|
Pol-Ease 2650 Mold Release
A high performance silicon-free release agent for use with polyurethane rubber
molds when casting concrete or plaster. |
|
| Quart |
$10.50 |
|
| 5 Gallons |
$110.00 |
|
PolyCoat
PolyCoat is a sealer and semi permanent release that can be sprayed or wiped onto polyurethane rubbers to give them a thin silicone coating that reacts and bonds to the underlying polyurethane surface. This thin coating can do amazing things.
|
|
| Quart |
$34.00 |
|
| 1 Gallon |
$110.00 |
|
| |
Pol-Ease Mold Rinse
This liquid concentrate is designed to reduce surface air bubbles on plaster castings
made in Polytek rubber molds. |
|
| 5 Gallons |
$39.00 |
|
| |
Poly PVA Solution
A water soluble, film forming coating useful as a barrier coat on certain rubber
molds to allow resins to be cast in them without sticky surfaces. Also may be useful
as a removable sealer for porous surfaces alone or in conjunction with paste wax. |
|
| Quart |
$11.25 |
|
| 5 Gallons |
$97.00 |
|
PolyPurge Dry Blanket Gas
Poly Purge dry gas is designed to spray into open containers before sealing the lid to
displace moist air, thus extending the life of the polyurethane liquids. Packaged in
an aerosol type can with a special nozzle extension. |
|
| 10 oz. |
$12.50 |
|
| |
Zinsser Shellac
A fast drying transparent coating functioning as a undercoat to seal porous surfaces,
to prime smooth surfaces, or as a clear finish for wood or other material. Sealant
for sulphur-based clays used prior to molding. |
|
| 12 oz |
$5.75 |
|
| |
Slide by Dura Kote
This is the ideal mold release agent for both thermoplastics and thermosetting
resins. Dura Kote is a solvent dispersion of a special air drying release resin that will
not transfer from mold to cast. Great for pattern waxes also. |
|
| 16 oz. |
$8.25 |
|
| |
Omni Wax
A soft paste wax that can be used as a release agent. It's a good release agent for Forton and plaster products. |
|
| 1 lb |
$6.50 |
|
